33
Encoder Turn
To edit the turn functionality of the Encoder when in Preset Edit Mode, press and hold the
SHIFT
button and move the
ENCODER
. You can scroll through the available parameter values
using the Encoder. Select what parameter you would like to edit by pressing the Encoder.
Channel:
The Encoder will send its messages over this channel. Select the global channel
(
Global
), a specific channel (
Channel 1
–
16
), a zone (
Zone
1
–
4
), or all channels (
Omni
).
Available Values:
Global, 1-16, Zone 1-4, Omni
Message:
•
Same as DAW
“DAW”:
This assignment will match the message assigned to the Hammer
88 Pro's current DAW selection's Encoder.
•
Program Cycle
“PRG CYCL”:
This is useful for selecting between different presets in
software or external MIDI hardware. Select from 2-4 program messages.
•
Program Inc/Dec
“PG IN/DC”
: This is useful to scroll through multiple program
messages.
•
CC Cycle
“CC CYCLE”:
This useful for controlling from 2-4 CC values, as seen on a
button or virtual instrument control with 2-4 parameters. Select from 2-4 values.
•
CC Inc/Dec
“CC IN/DC”:
This is useful for scrolling through several CC values.
•
CC Relative
“CC RELTV”:
This is useful for controlling endless Encoders in software.
Select from Right 65, Left 63; Right 63, Left 65; Right 127, Left 01; Right 01, Left 127.
When set to Program Cycle, these are the available parameters:
Values:
The Encoder will cycle through this many Program values (one at a time) when you
turn it:
1 Values
,
2 Values
,
3 Values
, or
4 Values
.
Available Values:
•
2 Values
•
3 Values
•
4 Values
First:
The Encoder will send this Program message first when you press it.
Available Values:
0-127
Second:
The Encoder will send this Program message second when you press it.
Available Values:
0-127
Third:
The Encoder will send this Program message third when you press it.
Available Values:
0-127
Last:
The Encoder will send this Program message last when you press it.
Available Values:
0-127