Output Page
The
output
page provides you with control over each of the FireWire Audiophile’s
analog and digital outputs, as well as that of the
aux bus
and
headphones
bus.
Output Channels
– Virtual faders control the individual channel output levels. The
output faders correspond to their respective analog and digital hardware outputs. When
the
main/aux
button is set to
main
, the Output Channel gets its signal from the bus
assignments selected on the
mixer
page. (See “Main/Aux Button,” below.)
Balance Controls
– The
bal
control allows you to adjust the balance of the associated
pair’s stereo output.
Linking
- Stereo pairs can be linked together with the link button above each channel
pair. Once the channel is linked (the button turns blue), grabbing and moving one fader
will move both faders in unison.
Main/Aux Button –
When the
main/aux
button is in the
main
position (the button turns
blue), the associated analog or digital outputs carry their respective bus signals, as
determined by the routing selected on the
mixer
page:
•
outputs
1/2 out
carries signals routed to bus
1/2
•
outputs
3/4 out
carries signals routed to bus
3/4
•
outputs
spdif out
carries signals routed to bus
spd
