manualshive.com logo in svg

M-Audio Firewire Audiophile, User Manual

Share
Download
M-Audio Firewire Audiophile User Manual Download Page 22

11 When you see the Completing New Hardware Wizard screen, click “Finish” to

complete the installation.

12  You will be prompted to reboot your computer one last time.  Click “Yes” to reboot.

13  Your FireWire Audiophile is now ready to use. You will see the M-Audio FireWire

Audiophile control panel icon in your system tray (lower right corner of your
desktop). Double-click on the icon to open the control panel.

Mac OSX

NOTE:

 Never connect or disconnect the FireWire Audiophile while the computer is on.

Also, if you’re going to use bus power, we recommend that you connect the FireWire
cable before turning on the FireWire Audiophile’s power button.

IMPORTANT:

 There are differences in administrator authorization between OS 10.1.5,

10.2.X, and OS 10.3.X.   For 10.1.5, you must click on the lock icon of the installer to
authorize the installation. You will be prompted for your username and password after

Summary of Contents for Firewire Audiophile


























































Reviews:

No comments

Brands by name

Popular brands

Load more brands