background image

Limited Lifetime Warranty

MIDIMAN warrants that this product is free of defects in materials and
workmanship under normal use so long as the product is: owned by the
original purchaser; the original purchaser has proof of purchase from an
authorized MIDIMAN dealer; and the purchaser has registered his/her
ownership of the product by sending in the completed warranty card.

This warranty explicitly excludes power supplies and included cables which
may become defective as a result of normal wear and tear.

In the event that MIDIMAN receives written notice of defects in materials or
workmanship from such an original purchaser, MIDIMAN will either replace
the product, repair the product, or refund the purchase price at its option. In
the event any repair is required, shipment to and from MIDIMAN and a
nominal handling charge shall be born by the purchaser. In the event that
repair is required, a Return Authorization number must be obtained from
MIDIMAN.  After this number is obtained, the unit should be shipped back to
MIDIMAN in a protective package with a description of the problem and the
Return Authorization clearly written on the package.

In the event that MIDIMAN determines that the product requires repair
because of user misuse or regular wear, it will assess a fair repair or
replacement fee.  The customer will have the option to pay this fee and have
the unit repaired and returned, or not pay this fee and have the unit returned
unrepaired. 

The remedy for breach of this limited warranty shall not include any other
damages. MIDIMAN will not be liable for consequential, special, indirect, or
similar damages or claims including loss of profit or any other commercial
damage, even if its agents have been advised of the possibility of such
damages, and in no event will MIDIMAN’s liability for any damages to the
purchaser or any other person exceed the price paid for the product, regardless
of any form of the claim. MIDIMAN specifically disclaims all other warranties,
expressed or implied. Specifically, MIDIMAN makes no warranty that the
product is fit for any particular purpose.

This warranty shall be construed, interpreted, and governed by the laws of the
state of California. If any provision of this warranty is found void, invalid or
unenforceable, it will not affect the validity of the balance of the warranty,
which shall remain valid and enforceable according to its terms. In the event
any remedy hereunder is determined to have failed of its essential purpose, all
limitations of liability and exclusion of damages set forth herein shall remain in
full force and effect.

12

Summary of Contents for DELTA 1010-AI













Reviews: