88
MIDI Notes
You can assign the sustain pedal to send a MIDI note number when you press it.
To assign a MIDI note to the sustain pedal:
1.
Press
Edit
to enter Edit Mode. The
Edit
button will light up.
2.
Press the sustain pedal.
SUS
will appear in the
display
.
3.
Press the
Ctrl Assign
key. The
display
will show
ASGN
for 1 second and then show
SUS
and a number for the type of message it sends.
4.
Use the numeric keys (
0
–
9
) to enter
147
(if the display does not already show it). This sets
the sustain pedal to send MIDI note messages.
5.
Press the
Data 1
key. The
display
will show
DATA1
for 1 second and then show
SUS
and
a number for the MIDI note.
6.
Use the numeric keys (
0
–
9
) or
Preset Down
/
Up
(
) buttons to enter the desired note
number (
001
–
127
).
7.
Repeat Steps 5–6 but using the
Data 2
key. This will determine the Note On velocity.
8.
Repeat Steps 5–6 but using the
Data 3
key. This will determine the Note Off velocity.
9.
Press the
Enter
key. The sustain pedal is now set to send the assigned note, and you will
exit Edit Mode.
To cancel your changes instead, press
Edit
. You will exit Edit Mode without saving anything.
Remember to store the preset if you want to save your changes in that preset.
Tip:
You can assign a button to send a Note On message when it is pressed once and send a
Note Off message when it is pressed a second time. To do this, follow the steps above, but
enter
148
(instead of
147
) in Step 4.
