100
Bank Changes
Bank LSB and Bank MSB messages are used to access additional banks of presets on virtual
instruments, MIDI sound modules, etc. (if available).
Note:
A Bank LSB or Bank MSB number may not have any effect until you send a program
change message after it. See
to learn how to do this.
To set a Bank LSB or Bank MSB number:
1.
Press
Edit
to enter Edit Mode. The
Edit
button will light up.
2.
Press the
Bank LSB
or
Bank MSB
key. The
display
will show
LSB
or
MSB
and the LSB
or MSB number.
3.
Use the numeric keys (
0
–
9
) to enter the exact LSB or MSB number (
000
–
127
).
Alternatively, use the
Preset Down
/
Up
(
) buttons to enter the desired LSB or MSB
number (
000
–
127
) (please note that this will send a Bank LSB or Bank MSB message with
each button press).
4.
Press the
Enter
key.
To cancel your changes instead, press
Edit
. You will exit Edit Mode without saving anything.
Zone Bank Change
Zone Bank Change messages are sent on the channel(s) of active zones, thus accessing
additional banks of instrument sound presets (if available) for each zone. Each bank change
consists of an LSB number (Least Signficant Byte) and an MSB number (Most Significant
Byte). These bank change messages are stored in each preset, ensuring that each zone
selects the correct instrument whenever you load a preset.
Note:
A Bank LSB or Bank MSB number may not have any effect until you send a program
change message after it. See
to learn how to do this.
To set the zone bank change:
1.
Press and hold
Zone
for 1 second to enter Zone Edit Mode. The active
Zone Buttons 1
–
4
will flash.
2.
Press one of
Zone Buttons 1
–
4
to edit that zone. Alternatively, you can press multiple
Zone Buttons 1
–
4
to edit those zones simultaneously.
3.
Press and hold
Shift
, and then press the
Bank LSB
or
Bank MSB
key. The
display
will
show
LSB
or
MSB
and the LSB or MSB number.
4.
Enter the desired LSB or MSB number by doing one of the following:
•
While holding
Shift
, use the numeric keys (
0
–
9
) to enter an LSB or MSB number (
000
–
127
).
•
Use the
Preset Down
/
Up
(
) buttons to select an LSB or MSB number (
000
–
127
)
(please note that this will send a Bank LSB or Bank MSB message with each button
press).
5.
While holding
Shift
, press the
Enter
key.
6.
To set the bank change for another zone, repeat Steps 2–5.
To exit Zone Edit Mode, press
Zone
.
