39
Memory Dump
Press this key to send a “System Exclusive” (SysEx) memory dump for all 12 presets. You can
later send the SysEx file back to your Code Series keyboard to restore your presets.
See
Presets and Memory > Sending and Restoring SysEx Memory
to learn more.
Data 1
Press this key to enter the
Data 1
number (using the
numeric keys
(
0
–
9
)). This number
determines how the control functions (whether a button acts as a momentary or toggle button,
for example). The available numbers and their corresponding functions are listed in
.
This applies only to a
button
, a
pad
, or the
sustain pedal
when its
Control Assign
number is
a non-registered parameter number (NRPN, a parameter number higher than
127
).
Data 2
Press this key to enter the
Data 2
number (using the
numeric keys
(
0
–
9
) or the
Preset
Down
/
Up
(
) buttons). This number determines the control’s minimum value, its “released”
message, etc. The available numbers and their corresponding functions are listed in
.
Data 3
/
+
/
–
Press this key to enter the
Data 3
number (using the
numeric keys
(
0
–
9
) or the
Preset
Down
/
Up
(
) buttons). This number determines the control’s maximum value, its “pressed”
message, etc. The available numbers and their corresponding functions are listed in
.
MIDI Out
/
Color
Press this key to enable or disable the
MIDI Out
port. By default, this port is disabled, but you
can enable it to send out MIDI messages from your Code Series keyboard. It will not send out
incoming MIDI messages from your DAW or the
MIDI In
port. See
to learn more
about this.
Press and hold
Shift
and then press this key to set the color of the
pads
or
buttons
. See
Pads > Editing Assignments > Colors
Buttons > Editing Assignments > Colors
learn more about this.