M-Audio ACCENT MODULE MIK1, Service Manual, Page: 32 / 39

32
Diagnosis
Info. Explanation
Red LED goes red
Green LED goes green
Blue LED goes blue
All LED goes white
The final complete interface of currently tested item will appear until all these four color have been
lightened:

In the current test, press [B2] or turn the dial in clockwise direction to enter the next test item.

Press [B8] key or the dial to recheck this item.
Test9: LCD test
When having this test, the LCD will show you two lines, one for capital U, and the other for*:

In the current test, press [B2] or turn the dial in clockwise direction to enter the next test item.

Press [B8] key or the dial to recheck this item.
Test10: Aux in test
When having this test, if there is no Aux in, or the Aux in/Mic switch has not been set to “Aux in”,
Press insert Auxin will appear at the bottom of the LED, reminding you to insert Aux in or set the switch
to the right position
：
If Aux in is ready, Auxin Inserted! will appear at the bottom of the LCD. Now, you can start the test:
09/15 LED
Finished: OK.
UUUUUUUUUUUUUUUUUUUU
********************
11/15 Auxin
Please Insert Auxin