M-Audio ACCENT MODULE MIK1, Service Manual, Page: 27 / 39

27
Diagnosis
If you are having a complete system self test (press B1, B2, and B5), then the checksum in hex
system will appear in the LED. For example, 1234 H means the checksum is 1234.

In the current test, press [B2] or turn the dial in clockwise direction to enter the next test item.

Press [B8] key or the dial to recheck this item.
Test2: SPIFlash test
When having this test, Waiting will be in the middle of the LED, representing SPIFlash test is on
：
When the check is down, the LED will show the result, like OK representing data in SPIFlashl is
correct
：
Any problem happened in SPIFlash, ERROR .
：
If you are having a complete system self test (press B1, B2, and B5), then the checksum in hex
system will appear in the LED. For example, 1234 H means the checksum is 1234.

In the current test, press [B2] or turn the dial in clockwise direction to enter the next test item.

Press [B8] key or the dial to recheck this item.
03/15 SPIFlash
Checking: Wait..
03/15 SPIFlash
Finished: OK.
03/15 SPIFlash
Finished: ERROR!
02/15 NorFlash
Finished: 1234 H
03/15 SPIFlash
Finished: 1234 H