M-Audio ACCENT MODULE MIK1, Service Manual, Page: 25 / 39

25
Diagnosis
System Self-test
Operating Instruction
System self-test function could assist you to make a comprehensive check with these functions:
LED, DAC, ADC, USB port, function keys, keys, pedals, and RAM, ROM of A5 chip.
Before power on, please follow the procedure below:

Connect the piano to PC via USB cable.

Insert an USB flash disk card
Connect headphone

Connect AUX IN to external audios or microphones

Connect AUX OUT to external speakers
Steps to enter system self-test:

Press down B1, B2, and B4 key and press down the power button to enter fast system self-test
mode (Choose fast system self-test in Flash).

Press down B1, B2, and B5key and press down the power button to enter complete system
self-test mode (Choose complete system self-test in Flash).

To avoid any interference, please first update series number when enter into system self-test,
and then start the following procedures.
You can choose a test item through button combinations:

Press [B2] key or turn the dial in clockwise direction to enter the next test item.

Press [B1] key or turn the dial in anti-clockwise direction to return to the previous test item.

Press [B1] key or the dial to recheck this item.

For a normal test of function keys and dial, dial can only be used in checking function keys,
while function keys can only be used in checking dial.
Note: When one test item is successfully done, you have to switch to the next test item manually.