FES-LS8-M100 MOTOR manual Version 1.21
April 2020
Page 9 of 12
7. Removal of motor
Removal of motor from sailplane is only allowed in case of
written permission
from
manufacturer otherwise warranty is not valid anymore!
Warning!
It is not allowed to fly with removed motor from the sailplane, as C.G. position
change significantly!
On back side of mounting wall are visible four M8 nuts, tightened over big spacer
and rubber silen blocks. Please leave them at they are. Proper way of removing
motor is to follow next steps:
To remove the motor assembly from the glider
(complete with spinner and
propeller)
1.
From the cockpit side, remove glass-fibre cover, mounted in the centre of the motor
mounting rib. To accomplish this, remove four M4 bolts. Trough the centre of the
cover goes pneumatic tube which is connected to pitot assembly. Carefully slide back
cover in order not to damage pneumatic tube.
