8
3 .1 bat te Rie s
batteRy basiCs
The batteries used on the LYRIC are based on a Lithium type technology. These batteries are designed
using the latest technology for high power density, low weight and a long life span.
Before using the LYRIC for the first time, please charge both batteries until the green LED on the
charger unit lights up (approximately 5 hours with the standard charger).
batteRy led Read out
Push the button (1) to turn on the LED interface. The 5 LED lights (2) show the remaining battery
capacity:
5. LED = battery capacity 100% - 80%
4. LED = 80 %– 60%
3. LED = 60% - 40%
2. LED = 40% - 20%
1. LED = 20% - 0%
The LED display turns off automatically after 5 seconds.
note
The LYRIC battery power is activated by the LYRIC's electronic remote key (ignition system).
See chapter 3.2 Remote Key/Alarm for more information.
CHaRging of batteRies
1. First connect the AC power cord to a standard socket-outlet (110... 240Vac/50 or 60Hz)
2. Then connect the DC connector to the battery.
Charge the battery until the charger’s status LED changes to green. (Full charge = 5 hrs)
batteRy CHaRgeR
LED1: red = charger connected to AC Power
LED2: yellow = charging
LED2: green = fully charged
Caution
Do not combine batteries with different charge levels on the same LYRIC; i.e. one fully charged battery
with one partially discharged battery. This reduces the lifetime of the batteries. When you have more
than one LYRIC in use, make sure to always keep batteries as a pair. The two batteries belonging to
one set are marked with the same set-number above the lock, together with the letters ”L” for left
”R” for right (i.e. L000455 and R000455); these two batteries must always be used together.
3 . lyRiC fe atu Res
1
2
!
