Install faucet, any other accessories and drains per
manufacturers’ instructions. When installing drains
use a high grade silicone.
Warning:
Do not use plumber’s putty. It will cause
product failure and void warranty. Use a high
grade silicone for all necessary locations.
6.
6
Page 4
Peel back protective film around faucet, drain holes,
and sink perimeter.
5.
5
Remove the sink by pushing in on the side clips
from underneath and pushing up gently on sink
until free.
4.
4
Trial fit your sink into the cutout by placing the sink at an
angle. Push down on the front of the sink while holding
the faucet side against the counter top. Push down firmly
to make sure the sink sits flush on the counter top. Make
adjustments to the cutout if needed. The apron should fit
flush to the front of the cabinet and should completely
conceal any openings for false drawers. The sink should sit
flat on the counter top. Small gaps can be concealed with
caulk during final installation.
3.
3
