Page 11
For technical questions, please call 1-888-866-5797.
Item 63289
Sa
Fety
Opera
ti
O
n
Maintenance
Setup
automatic Line Feeder
nOtice: to prevent damage to trimmer,
DO nOt BuMp SpOOL HOuSinG On GrOunD.
this string trimmer feeds Line
automatically when stopping.
1� After each operation, when Trigger is
released, Line will be fed out and cut
to proper length by Line Cutter�
2� If Trimmer is not cutting correctly, Spool may
be tangled� Remove Spool and rewind Line�
3� To advance Line by hand, push Line Outlet Button
on Spool Housing and pull out Line at the
same time� Approximately 1/4" of Line can be
pulled out each time the button is pushed�
trimmer Operation
1� Remove Battery Pack�
2� Adjust Auxiliary Handle as necessary�
3� Adjust length as necessary by turning
Extension Lock clockwise, pulling Extension
Tube out to desired length, then turning
Extension Lock Counterclockwise securely�
4� Adjust head angle by pushing Head Angle
Button, moving head until desired angle
is achieved, then releasing button�
5� Move Edge Guide down until it locks into place�
6� Install fully charged Battery Pack�
nOtice:
to prevent damage to tool or property,
avoid contact with fences, trees, shrubs and the like�
7� Holding Trimmer with both hands, press
Trigger Safety Lock, then press Trigger�
8�
DO nOt reSt triMMer On GrOunD.
9� Do not force the Trimmer� Use the
tip of the Line to do the cutting�
10� Release Trigger when done�
11� When finished, to prevent accidents:
• Remove battery pack�
• Wipe external surfaces of the appliance
with clean cloth� Store in an indoor
dry area out of reach of children�
edger Operation
1� Remove Battery Pack�
2� Push Edger/Trimmer Button, then rotate
head to the left until it clicks into place�
3� Adjust Auxiliary Handle as necessary�
4� Adjust length as necessary by turning
Extension Lock clockwise, pulling Extension
Tube out to desired length, then turning
Extension Lock Counterclockwise securely�
5� Adjust head angle by pushing Head Angle
Button, moving head until desired angle
is achieved, then releasing button�
6� Install fully charged Battery Pack�
nOtice:
to prevent damage to tool or property,
avoid contact with fences, trees, shrubs and the like�
7� Rest Trimmer on Edger Wheels�
8� Holding Trimmer with both hands, press
Trigger Safety Lock, then press Trigger�
9� Do not force the Trimmer� Use the
tip of the Line to do the cutting�
10� Release Trigger when done�
11� When finished, to prevent accidents:
• Remove battery pack�
• Wipe external surfaces of the appliance
with clean cloth� Store in an indoor
dry area out of reach of children�
