Lynxmotion UAV
HQuad500 Frame Assembly Guide
2.3 - Center Plates Sub-Assembly
The clamps are asymmetric and they need to be installed correctly on the top & bottom plates. Mostly to be sure the
top & bottom will work together but also help with the Camera Plate mounting up front. To help with this process we
named the sides of the clamps A and B.
Lynxmotion UAV HQuad500 Clamps Sides
Material Needed:
●
16x 16mm Aluminum Clamp Half
●
70x 440 x ¼” Hex screws
●
1x HQuad500 Top Plate
●
1x HQuad500 Bottom Plate
●
6x 440 x 3/16” x 1” Aluminum Standoff
1.
Mount each Half Clamp on the frame keeping the right location of the A and B sides using two 440 x ¼”
Hex screws. Those two views are from the Inside of the frame and where the clamps should sit. This is also
important as the mounting pattern for the Quadrino Nano features a cutout to allow advanced wiring and
needs to match.
Lynxmotion UAV HQuad500 Center Plates Clamps Location
Lynxmotion UAV
P.7
