Lynx Yeti 550, Operator'S Manual

Page: 29 / 104


WARNING
Locking keeps brake lever engaged
and keeps pressure against brake
disc.
Anyhow, this pressure may de-
crease so low, that it will not keep
vehicle in place. Never leave the
snowmobile on hill only with park-
ing brake applied.
4) Pilot Lamps
Reverse (Red)
This pilot lamp will light up
when reverse is selected.
DESS Status (Red)
This lamp will light up to
confirm DESS status.
Refer
to previous paragraphs for
description.
High Beam (Blue)
Lights when headlamp is on
HIGH beam.
Engine Overheat Warning (Red)
If this lamp glows, reduce
snowmobile speed and run
snowmobile in loose snow or
stop engine immediately.
Low Battery Voltage (Red)
This lamp will light up to
indicate a low battery voltage
condition. See an authorized
Lynx dealer as soon as
possible.
Injection Oil Level/Engine
Oil Pressure
Yeti 2-stroke models
This pilot lamp will glow up when in-
jection oil level is low. Stop vehicle in
a safe place then, replenish injection
oil reservoir.
V-800 Series
This pilot lamp will glow up when en-
gine oil pressure is too low. Stop vehi-
cle in a safe place then, check oil level
and replenish as described in
ENGINE
OIL LEVEL .
Restart engine, oil pilot lamp must turn
off after few seconds. If oil pilot lamp
still glows up, stop engine and have lu-
brication system inspected by an au-
thorized Lynx dealer.
Engine Management System
(EMS) (Red)
This lamp will light up to
indicate a trouble.
Refer
to TROUBLESHOOTING for
trouble code meaning and
remedy.
_____________________
27