LYNX
Technik
AG
LynxCentraal
Broadcast Television Equipment
5000 Series
Quick-Start Guide
©
2022
LYNX
Technik
AG
Page 8
®
Network Configuration
The network feature is where control servers are configured and attachments
between control servers and RCT 5023 rack controllers are made. It also where
you configure the local COM ports. (This feature is available for blue and yellow)
Current Infrastructure Configuration
The current infrastructure configuration table, on the left, lists all control servers
which were discovered in the LynxCentraal IP network via ethernet broadcast.
Below each control server, is a list of its current controller attachments. Servers
which are not permitted for the current operator, or servers which were filtered
out by the current operator do not show up in this table.
Available Rack Controllers
The available rack controllers table, on the right, lists all RCT 5023 (and RCT 1012)
rack controllers which were discovered in the LynxCentraal IP network via ethernet
broadcast.
Control servers, RCT 5023 (and RCT 1012) rack controllers which reside in
different IP subnets can be added explicitly with the IP find tool in the upper right
corner of the page.
Options of Attaching a RCT 5023 Rack Controller to a Control SERVER
1.
Select an RCT 5023 (or RCT 1012) rack controller from the
table and drag it into the
table,
dropping it onto the desired control server.
2.
Select an RCT 5023 (or RCT 1012) rack controller in the
table, open its context menu and select
Attach
This will present a
dialog which allows you to pick the desired control server.
