LX-F6
LYNX Pro Audio S.L. -
Valencia, Spain -
www.lynxproaudio.com - [email protected]
LX-F6
LX-F6
SV-LXF6
SV-LXF6
De 0º a 6º
De 3º a 9º
S1
ASSEMBLY AND ANGULATION OF LX-F6 CABINETS
The cabinets can be placed with variable angulation between 0º and 9º.
Once the angle has been determined for each of the following cabinets, lightly raise the flying frame and cabinet 1
so that you can release the pins BALL-PSR located at the rear of cabinet 1. Insert piece
S1
on each side of cabinet
1 in position according to the necessary inclination, removing and inserting the pin BALL-PSR accordingly.
Insert piece
S1
from cabinet 1 in to the slots for the lateral plates in cabinet 2 from where we have removed pins PALL-
PSR so that when the relevant holes coincide we can re-insert these pins.
Now cabinet 2 will be fixed to cabinet 1 with the corresponding inclination degree. Repeat the same process for the
remaining cabinets until all required cabinets are assembled in vertical array.
33
Summary of Contents for LX-F6
Page 43: ......