LX-F6
LYNX Pro Audio S.L. -
Valencia, Spain -
www.lynxproaudio.com - [email protected]
SELECT THE INPUT: DIGITAL OR ANALOG
There are four input options: Analog / Digital L / Digital R / Digital L+R
To select the input mode just press the OK button (3) and the up button (1), both at the same time but pressing
the OK button first. Then you can select one of the four options using the up button (1). To confirm your selection
press OK (3) until the progress bar finishes. The display will show an inverted D (digital) or an inverted A (Analog)
so you can always know if the input is digital or analog.
1
2
3
SELECT AND RUN PRESETS
To change the preset configuration just press the up button (1) and down button (2) until you see the title and
preset number required (Fig2). Once found, press OK (3) until the progress bar finishes (Fig3). The display will
indicate “Loading DSP” (Fig4)
Fig 3
Fig 4
Note:
In case of a power cut, the DSP will save its last configuration when restarted.
Fig 2
12
Summary of Contents for LX-F6
Page 43: ......