58
DSX
5 - CONFIGURATION
Once the password is activated, depending on the security level if we try to access a "blocked zone" the
amplifier will ask for the password. If you do not enter it properly you will not be able to change anything. Even
if you know the password, the security level will only allows you to change the settings that you was permited
by this level.
Knowing the
Password
you can always remove it, from the security menu, enter the pasword and
select "
Deactivate
".
In case that the push button is already locked, and you want to unlock it, go to Security Level and
choose
Level 0
and accept.
After selecting zones to allow access, select Closed Mode
in the main screen and you will be asked for a password. This
selection can be made on the drop down menu in the Preset
Information section.
ZONE ACCESS
:
From the top of the Main screen, we can choose or decide to which zones the user will be allowed to
modify parameters. By default software starts in an "Open" mode which allows you to access every zone
without restrictions. Just click in the boxes on "
Access to zones
" it will deactivate permissions to access
there.
When you restrict acces to zones, icons change and you are not able to see any parameter information,
they will look like this:
You have two Modes to access:
-
Closed Mode
: User can only access the
zones activated, (Remember: to activate this mode you
will be asked for a password)
-
Open Mode
: There are no restrictions to any
place in the software, you can modify all parameters.
But if you come from a Closed mode, you will be asked
for the password again.
Summary of Contents for DSX-1004
Page 1: ...Valencia Spain www lynxproaudio com USER MANUAL V 11 08 DSX ...
Page 61: ......
