Care & use/installation
|
17
the grill arrives nearly ready to use and requires only minor
assembly.
By carefully following the uncrating and unpacking steps,
you will improve the customer’s first lynx experience.
shipping weight on smaller units is app. 300 pounds and
larger units may weigh over 500 pounds.
CrATe & CArTon
• important! do not remove staples around the top of
the carton. these staples hold a wooden pallet in place
inside the carton that protects the unit from damage.
removing these staples may cause the pallet to fall on
the top of grill.
how to remove the Carton
• Cut the main strap holding the grill to the pallet.
• remove the staples at the bottom of the carton.
• lift off the carton.
• With assistance, remove the grill from the pallet and
place into desired location.
the wheels sit down in the gaps of the shipping crate so
that the grill can sit safely and solidly on the crate during
shipping. the grill cannot be slid directly off of the pallet.
one way to safely move the grill off of the pallet is by lifting
one end of the grill high enough to place a ramp under the
wheel and then lift the
other end while rolling
the grill off of the pallet.
inTerior PACkinG
lynx uses sturdy tie-down cables and straps to ensure
your grill arrives at your home in the same condition that
it left our factory. Be sure you haVe remoVed all tie
doWns Before using your grill.
• remove any loose items from the packaging and fire-box
• make sure you remember to remove the tie-downs on the
burners.
• ensure the burners are properly seated on the burner
valve orifice and sitting level with the legs in the frame
slots and have no side-to-side movement.
UNPACKING & ASSEMBLY
use two or more people to move or install this
unit. failure to follow this instruction can result in
back or other personal injuries.
WarnIng:
eXCessIve WeIgHt Hazard!
grill will not
slide directly
off pallet.
Heat Shield Removed,
Orifice/Venturi Position
