2.14 Displaying Faulted Zones
If a zone is found to be in fault, this is indicated by the day LED flashing. To check which
zone is in fault enter a valid user code and note which zone LED is illuminated. A tamper
fault is indicated immediately by the tamper zone LED illuminating.
Enter:
Fault
Zone
3
?
?
?
?
Note: System can not be armed unless the zone fault is cleared or omitted from the
system when arming.
2.15 Intelligent Auto Reset
If the panel has activated whilst you are away, once the alarm time as timed out, the panel
will automatically reset. The alarm will activate once more should another zone be acti-
vated, or if the zone that originally activated, is closed. Upon entering the premises the
strobe will be flashing to indicate system has been activated.
Enter a valid user code and note which zones have activated then press RESET key.
2.16 Mains Supply Failure Indication
Mains LED illuminated RED = No mains supply
Fault
Mains
2.17 Mains Supply Failure and Low Battery Indication
Mains LED illuminated RED and flashing = No Mains and
Low Battery
Fault
Mains / Battery
2.18 Low Battery Indication
Mains LED illuminated ORANGE and flashing = Low Battery
Fault
Low Battery
2.19 Service Require
Day LED flashing and system arms = Service Required
Service Required
11
