4.01 QUICK USER REFERENCE GUIDE
Full Guard Arming Option 1
Enter User Code
Leave premises via
exit route
# Full Arming Guard Option 2
Press:
SET
3 seconds
Leave premises via
exit route
Part Guard Arming Option 1
Enter User Code Press:
SET
Leave to none pro-
tected area of building
# Part Guard Arming Option 2
Sleep Watch Keypad
Press:
SLEEP
for 3 seconds
Sleep Button illumi-
nates Red
Silent Set
Press:
PROG
during exit time Keypad no beeps
Omit Zones Full Guard
Press:
OMIT
after entering
user code, enter zone number
Press:
OMIT
Omit LED illuminates
Omit Zones Part Guard
Press:
OMIT
after entering
user code, enter zone number
Press:
OMIT, SET
Omit LED illuminates
Full Guard Disarming
Enter User Code
Day LED illuminates
Part Guard Disarming Option 1
Enter User Code
Day LED illuminates
# Part Guard Disarming Option 2 Sleep Watch Keypad
Press:
SLEEP
for 3 seconds
Sleep LED
extinguishes
Disarming After Alarm Activation Enter User Code
Press:
RESET
Day LED illuminates
Panic Keypad
Press:
SET, OMIT, SET
SOS) Day LED flashes
Memory Recall
Press:
PROG
, Enter Master
User Code Press:
MEM
Last Activation Display
First
Note:
To use those options marked with “# “, ask your installation engineer to program
them.
Important:
If after 14 key presses a valid code has not been entered the keypad will not accept
any entries for 2 minutes. You must wait then re-enter your user code.
Do not leave this quick reference guide with your user codes near the control panel.
16
