Lyngdorf Audio LS-1000 – Installation manual
8
Mount the Brackets for the Top and Bottom Loudspeakers
Using a Phillips (PH) screwdriver and the supplied black M6x40 screws, secure the dedicated top and bottom
brackets to the loudspeakers in their respective stacks as shown to the right.
Connect the Loudspeaker Cables
Connect and tighten the speaker cables to the base plate of the first LS-1000 speaker.
Make sure the cable ends are securely tightened and no bare wire is standing out.
Other LS-1000 elements will connect through the plug-in terminals.
