Lyngdorf Audio LS-1000 – Installation manual
6
Required space for Lyngdorf LS-1000 Left/Right
The minimum space required including top and base brackets bracket are:
Speaker
Depth
Height
Width
LS-1000 Left/Right
95 mm / 3.7 in
585 mm / 23 in
290 mm / 11.4 in
each additional
LS-1000 Left/Right
95 mm / 3.7 in
500 mm / 19.7 in
290 mm / 11.4 in
4 x LS-1000 Left/Right
95 mm / 3.7 in
2085 mm / 85 in
290 mm / 11.4 in
Required space for Lyngdorf LS-1000 Center
The minimum space required including top and base brackets bracket are:
Speaker
Depth
Height
Width
LS-1000 Center
142 mm / 5.6 in
585 mm / 23 in
290 mm / 11.4 in
each additional
LS-1000 Center
142 mm / 5.6 in
500 mm / 19.7 in
290 mm / 11.4 in
4 x LS-1000 Center
142 mm / 5.6 in
2085 mm / 85 in
290 mm / 11.4 in
Cables
Recommended minimum up to 16m / 50ft: AWG 14/2 or 2-lead 2mm2
Recommended minimum from 16m / 50ft and up: AWG 12/2 or 2-lead 3.5mm2
Recommended maximum: Double AWG 10/2 or 2-lead 5mm2
Allow min. 50cm longer cable for connecting the cable to the speaker binding posts before the speaker is
placed inside the wall or ceiling.
Arranging the speaker units
Arrange the individual LS-1000 units on the floor, ready to combine them as a stack. For each loudspeaker
stack, place the loudspeakers with the back side down on the floor, preferably close to the wall cutout in
which the stack is to be mounted. Make sure that the floor is covered with fabric – such as carpeting - to avoid
scratching the loudspeakers.
