LyngBox HDTV receiver Manual Download Page 20

know that what they have is not the original, so that any problems introduced 

by others will not reflect on the original authors’ reputations.

  Finally, any free program is threatened constantly by software patents.  We 

wish to avoid the danger that redistributors of a free program will individually 

obtain patent licenses, in effect making the program proprietary.  To prevent 

this, we have made it clear that any patent must be licensed for everyone’s free 

use or not licensed at all.

  The precise terms and conditions for copying, distribution and modification 

follow.

GNU GENERAL PUBLIC LICENSE

TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION

  0. This License applies to any program or other work which contains a notice 

placed by the copyright holder saying it may be distributed under the terms of 

this General Public License.  The “Program”, below, refers to any such program 

or  work,  and  a “work  based  on  the  Program”  means  either  the  Program  or 

any  derivative  work  under  copyright  law:  that  is  to  say,  a  work  containing 

the Program or a portion of it, either verbatim or with modifications and/or 

translated into another language.  (Hereinafter, translation is included without 

limitation in the term “modification”.)  Each licensee is addressed as “you”.

Activities other than copying, distribution and modification are not covered 

by this License; they are outside its scope.  The act of running the Program is 

not restricted, and the output from the Program is covered only if its contents 

constitute a work based on the Program (independent of having been made 

by running the Program). Whether that is true depends on what the Program 

does.

    1.  You  may  copy  and  distribute  verbatim  copies  of  the  Program’s  source 

code as you receive it, in any medium, provided that you conspicuously and 

appropriately  publish  on  each  copy  an  appropriate  copyright  notice  and 

disclaimer of warranty; keep intact all the

 

notices that refer to this License and 

to the absence of any warranty; and give any other recipients of the Program 

a copy of this License along with the Program.

You may charge a fee for the physical act of transferring a copy, and you may 

at your option offer warranty protection in exchange for a fee.

  2. You may modify your copy or copies of the Program or any portion of it, 

thus  forming  a  work  based  on  the  Program,  and  copy  and  distribute  such 

modifications or work under the terms of Section 1 above, provided that you 

also meet all of these conditions:

    a) You must cause the modified files to carry prominent notices stating that 

you changed the files and the date of any change.

    b) You must cause any work that you distribute or publish, that in whole or in 

part contains or is derived from the Program or any part thereof, to be licensed 

as a whole at no charge to all third parties under the terms of this License.

    c) If the modified program normally reads commands interactively when run, 

you must cause it, when started running for such interactive use in the most 

ordinary way, to print or display an announcement including an appropriate 

copyright notice and a notice that there is no warranty (or else, saying that 

you provide a warranty) and that users may redistribute the program under 

these  conditions,  and  telling  the  user  how  to  view  a  copy  of  this  License.  

(Exception: if the Program itself is interactive but does not normally print such 

an announcement, your work based on the Program is not required to print 

an announcement.)

These  requirements  apply  to  the  modified  work  as  a  whole.    If  identifiable 

sections of that work are not derived from the Program, and can be reasonably 

considered independent and separate works in themselves, then this License, 

and  its  terms,  do  not  apply  to  those  sections  when  you  distribute  them  as 

separate works.  But when you distribute the same sections as part of a whole 

which is a work based on the Program, the distribution of the whole must be 

on the terms of this License, whose permissions for other licensees extend to 

the entire whole, and thus to each and every part regardless of who wrote it.

Thus, it is not the intent of this section to claim rights or contest your rights to 

work written entirely by you; rather, the intent is to exercise the right to control 

the distribution of derivative or collective works based on the Program.

In addition, mere aggregation of another work not based on the Program with 

the Program (or with a work based on the Program) on a volume of a storage 

or distribution medium does not bring the other work under the scope of this 

License.

 

 3. You may copy and distribute the Program (or a work based on it, under 

Section 2) in object code or executable form under the terms of Sections 1 

and 2 above provided that you also do one of the following:

    a) Accompany it with the complete corresponding machine-readable source 

code, which must be distributed under the terms of Sections 1 and 2 above on 

a medium customarily used for software interchange; or,

    b) Accompany it with a written offer, valid for at least three years, to give 

any third party, for a charge no more than your cost of physically performing 

source distribution, a complete machine-readable copy of the corresponding 

source code, to be

        distributed  under  the  terms  of  Sections  1  and  2  above  on  a  medium 

customarily used for software interchange; or,

        c)  Accompany  it  with  the  information  you  received  as  to  the  offer  to 

distribute  corresponding  source  code.    (This  alternative  is  allowed  only  for 

noncommercial distribution and only if you received the program in object 

code  or  executable  form  with  such  an  offer,  in  accord  with  Subsection  b 

above.)

The source code for a work means the preferred form of the work for making 

modifications  to  it.    For  an  executable  work,  complete  source  code  means 

all the source code for all modules it contains, plus any associated interface 

definition files, plus the scripts used to control compilation and installation of 

the executable.  However, as a special exception, the source code distributed 

need  not  include  anything  that  is  normally  distributed  (in  either  source  or 

binary form) with the major components (compiler, kernel, and so on) of the 

operating system on which the executable runs, unless that component itself 

accompanies the executable.

If distribution of executable or object code is made by offering access to copy 

from a designated place, then offering equivalent access to copy the source 

code  from  the  same  place  counts  as  distribution  of  the  source  code,  even 

though  third  parties  are  not  compelled  to  copy  the  source  along  with  the 

object code.

  4. You may not copy, modify, sublicense, or distribute the Program except as 

expressly provided under this License.  Any attempt otherwise to copy, modify, 

sublicense or distribute the Program is void, and will automatically terminate 

your rights under this License.

However,  parties  who  have  received  copies,  or  rights,  from  you  under  this 

License will not have their licenses terminated so long as such

parties remain in full compliance.

    5. You  are  not  required  to  accept  this  License,  since  you  have  not  signed 

it.  However, nothing else grants you permission to modify or distribute the 

Program or its derivative works.  These actions are prohibited by law if you do 

not accept this License.  Therefore, by modifying or distributing the Program 

(or  any  work  based  on  the  Program),  you  indicate  your  acceptance  of  this 

License to do so, and all its terms and conditions for copying, distributing or 

modifying the Program or works based on it.

  6. Each time you redistribute the Program (or any work based on the Program), 

the  recipient  automatically  receives  a  license  from  the  original  licensor  to 

copy, distribute or modify the Program subject to these terms and conditions.  

You may not impose any further restrictions on the recipients’ exercise of the 

rights  granted  herein. You  are  not  responsible  for  enforcing  compliance  by 

third parties to this License.

  7. If, as a consequence of a court judgment or allegation of patent infringement 

or for any other reason (not limited to patent issues), conditions are imposed 

on  you  (whether  by  court  order,  agreement  or  otherwise)  that  contradict 

the  conditions  of  this  License,  they  do  not  excuse  you  from  the  conditions 

of this License.  If you cannot distribute so as to satisfy simultaneously your 

obligations under this License  and any other pertinent obligations, then as 

a consequence you may not distribute the Program at all.  For example, if a 

patent license would not permit royalty-free redistribution of the Program by 

all those who receive copies directly or indirectly through you, then the only 

way you could satisfy both it and this License would be to  refrain entirely from 

distribution of the Program.

If  any  portion  of  this  section  is  held  invalid  or  unenforceable  under  any 

particular circumstance, the balance of the section is intended to apply and 

the section as a whole is intended to apply in other circumstances.

It  is  not  the  purpose  of  this  section  to  induce  you  to  infringe  any  patents 

or other property right claims or to contest validity of any such claims; this 

section has the sole purpose of protecting the integrity of the free software 

distribution system, which is implemented by public license practices.  Many 

people  have  made  generous  contributions  to  the  wide  range  of  software 

distributed  through  that  system  in  reliance  on  consistent  application  of 

that system; it is up to the author/donor to decide if he or she is willing to 

distribute software through any other system and a licensee cannot impose 

that choice.

This  section  is  intended  to  make  thoroughly  clear  what  is  believed  to  be  a 

consequence of the rest of this License.

  8. If the distribution and/or use of the Program is restricted in certain countries 

either by patents or by copyrighted interfaces, the original copyright holder 

who places the Program under this License may add an explicit geographical 

distribution  limitation  excluding  those  countries,  so  that  distribution  is 

permitted only in or among countries not thus excluded.  In such case, this 

License incorporates the limitation as if written in the body of this License.

  9. The Free Software Foundation may publish revised and/or new versions 

of the General Public License from time to time.  Such new versions will be 

similar in spirit to the present version, but may differ in detail to address new 

problems or concerns.

Each version is given a distinguishing version number.  If the Program specifies 

a version number of this License which applies to it and “any later version”, you 

have the option of following the terms and conditions either of that version or 

of any later version published by the Free Software Foundation.  If the Program 

does not specify a version number of this License, you may choose any version 

ever published by the Free Software Foundation.

  10. If you wish to incorporate parts of the Program into other free programs 

whose  distribution  conditions  are  different,  write  to  the  author  to  ask 

for  permission.    For  software  which  is  copyrighted  by  the  Free  Software 

Foundation,  write  to  the  Free  Software  Foundation;  we  sometimes  make 

exceptions for this.  Our decision will be guided by the two goals of preserving 

the  free  status  of  all  derivatives  of  our  free  software  and  of  promoting  the 

sharing and reuse of software generally.

38

39

Summary of Contents for HDTV receiver

























Reviews: