background image

• 8 •

• Parts to be cleaned should not have excessive oil - remove bulk oil

before cleaning in this solution.

• Not recommended for cleaning silver, sterling silver or silver plating.

• Will effectively clean gold jewelry, but avoid immersion of gemstones in

the solution as they may be damaged by the solution or sonic energy
or both.

• For optimum performance when cleaning cartridge cases, avoid more

than 2 layers - keep as much space between cartridges as possible.

• When cleaning cartridge cases, remove the basket from the unit and

load the shells into the basket. Lower the basket into the solution and
shake the basket slightly to help dislodge any bubbles that might be
present inside the cases.

• After making a new cleaning solution, preheat your cleaning solution

mix and run the De-gas feature on the unit for a minimum of 2 min-
utes. Dissolved gas in the solution can diminish the ultrasonic energy.
Once de-gassed, it is not necessary to de-gas again until the solution
is changed.

• Discard the solution when it becomes highly discolored or murky.

Rinse the unit with clean water before recharging.

• Do not mix with other cleaners or chemicals.

Summary of Contents for Turbo Sonic 6000













Reviews: