• 6 •
USER MAINTENANCE
• Unplug and empty unit after each use.
• Do not store water or cleaning solutions in cleaning tank for any long
periods of time.
• Keep unit in cool, dry, ventilated location.
OPERATING INSTRUCTIONS
For step by step instructions please see our instructional videos on the
Lyman Products website at : www.lymanproducts.com
1. Open the lid and remove basket. Place items into basket, then put bas-
ket into the cleaning tank. Add water to a level between MIN and MAX
to cover the items being cleaned.
If the unit is turned on without water, ultrasonic energy will not be
absorbed. This model is high-powered. If turned on for more than 15
seconds without water, it may damage or severely reduce the life of
the unit.
2. Connect the power cord to an outlet and turn the switch on. LED dis-
play shows 05:00. This is the default setting and most common timer
setting and working state. If the timer needs to be adjusted, press
TIME button and
button. The timer can be set between 1 and 30
minutes. Common cleaning times are 5, 10 or 15 minutes.
Prolonged cleaning time may result in:
a. Loosening of screws (if used).
b. Increasing pre-existing cracks.
c. Peeling of coating which was already separated.
3. Press On/Off button to start cleaning. During cleaning, 2 sets of blue
LED lights at the two sides of the unit illuminate, and a buzzing sound
can be heard from the cleaning tank, indicating that cleaning is under-
way. Closing the lid will reduce the noise level. The digital timer will
count down to show the remaining cleaning time. When it displays
00:00, the cleaning is done.
To stop cleaning at any time, press On/Off button. The unit is designed
with overheating protection to avoid extended and continuous operation
for too long. When the red light is on, the unit will not turn on even by
force. The unit will idle for about 20 minutes and can be restarted after
the green light comes on.
