5
14
!
SAFETY
!
Press this
/SCAN MP3 REC BUTTON
again to start the recording.
At this time, the USB or SD is flashing in 1Hz, (the target disk is
flashing). Press to stop the recording. When single song is being
recorded, then "ONE" is flashing in the screen. When file is being
recorded, then "FOL" is flashing. When all files are being recorded,
then "ALL" is flashing.
3.3
MP3 quick copy:
MP3 is in STOP mode to quick copy USB or SD.
Use
/ UP
DOWN button to select the target recorded USB
or SD disk (The USB or SD is flashing in 1HZ), press
/SCAN
MP3 REC BUTTON
to start the RECORD. At this time, "REC"
display for 2 seconds, USB or SD is flashing in 1HZ, the copy speed
is counted by percentage which 100% is complete copied. Press
STOP button to stop the RECORD.
4. / +10 BUTTON:
In MP3 mode, press this button to increase
10 songs for play. When the present folder is less than 10 songs, it
will jump to the last song. Press and hold this button more than 2
seconds, increase one folder at the present situation.
5. UP/
BUTTON:
In MP3 MODE, press this button to select the
next song. Press and hold this button to be fastly forward.
6. BACKLIGHT ON/OFF BUTTON:
First time to press USB/SD/ON/OFF
button to switch on the MP3 default backlight AUTO MODE. Press any
key except the BACKLIGHT ON/OFF BUTTON, the backlight is in high
light for 10 seconds. After 10 seconds if no any press to it,change to
low light. In the backlight AUTO MODE, press BACKLIGHT ON/OFF
BUTTON one time to switch off the backlight. In the off situation of the
backlight, press USB/SD/ON/OFFone time, the backlight change to
AUTO, can be switch to each other from AUTO to OFF.
7. MODE / DEL BUTTON:
7.1 In MP3 MODE, Press the MODE/DEL BUTTON the first time, the
LCD display and " ONE", Press the MODE/DEL BUTTON the
second time, the LCD display and " FOLDER" which is flashing
in 1Hz kb. Press the MODE/DEL BUTTON the third time, the LCD
display and " ALL".
2)Make sure if the Lavaliere MIC is damaged, if so, new one should be
replaced.
3)Make sure if the AC/DC fuse is broken or not, replace a new one (250/5A)
if it is broken.
5.Remove the 9V battery to avoid the leakage of acid and damaging
the components.
