4
15
6. Clean only with dry cloth. For stubborn stains, use a soft cloth
dampened with a weak solution of mild detergent and water. Dry
the apparatus immediately afterwards with a clean cloth. Do not
use abrasive cloth, thinners, alcohol, or other chemical solvents,
because they may damage the finish.
7. Do not block any ventilation openings. The ventilation shall not
be impeded by covering the ventilation openings with items, such
as newspaper, table cloth, curtains, etc.
8. Do not install near any heat sources such as radiator, heaters,
stove or other apparatus (including amplifier) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding
type plug. A polarized plug has two blades with one wider than
the other. A grounding type plug has two blades and a third
grounding prong. The wider blade or the third prong are provided
for your safety. If the provided plug does not fit into your outlet,
consult electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly
at plugs, convenience receptacles, and the point where they are
exit from the apparatus. If the power cord is damaged, it must be
repaired by a qualified repairer.
11. Only use attachments accessories specified by the manufactures.
12. Unplug this apparatus during lightning storms or when unused
for long period of time.
1. Read these instructions.
2. Keep these instructions.
3. Heed all Warnings.
4. Follow instructions.
5. Do not use this apparatus near water or in rain.
1. USB/SD ON/OFF BUTTON:
Press this button the first time as the
default power ON the machine. Press again to select from the mode
between the USB to SD. Press and hold this button more than 2
seconds to close the display and enter the Standby situation.
2. A - B / MIC/ AUX REC BUTTON:
2.1 In MP3 play mode, Press this button A-B first time in A, can set
the present playing audio file from the beginning point which is A
to the end point which is B. At this moment, the LCD is flashing
"A-". Press the "A-B" the second time, can set the end point of
present playing audio file, then it will enter auto repeat play situation.
The LCD is flashing the "A-B", at this time push again this button
to delete the repeat play function to enter normal play funciton.
2.2 Any situation in switch ON mode, Press this button more than 2
seconds to enter MIC/AUX IN RECORD setting situation. Use the
button
UP
DOWN to find out your target file to be recorded
to the USB or SD card. Press this button again to start the recording.
At this moment, USB or SD card is flashing in 1Hz. Press STOP
to stop the recording.
3.
/
SCAN MP3 REC BUTTON:
3.1 In MP3 Stop mode, first time to press this button is to play the MP3,
the LCD screen display the present play song or the past time
record per 5 seconds changed between them.
In MP3 Play mode, press this button to Pause the MP3 play. The
LCD screen display
*
In Play mode, press this button can change
the function from PLAY to PAUSE or from PAUSE to PLAY.
3.2 In MP3 play mode, press and hold this button more than 2 seconds
to enter recording function. If no any operation more than 8 seconds,
it will exit the RECORD function. At this time: USB and SD can be
recorded to each other. After check the flash, use the
/ UP
DOWN button to select "ONE", "FOL" or "ALL" record.
