9
NOTE: The single channel system allows only one microphone to
work at the same time . Dual channels allow two wireless
microphones work at the same time.
1.Put the goose style microphone into its position on the desk top of
the PA amplifier and correct screw it before starting a speech.
2.Under the PA amplifier, there are 4 adjustable foots to level the whole
set and the goose style microphone can be adjustable to your required
level too.
How to adjust the PA Amplifier
Power Supply
Output Power
Loudspeaker
Wireless Service range
Frequency Range
Frequency stability
Dimension
Net weight
: 1. AC Power voltage please refer to the correct
voltage on the label of the PA Amplifier main
machine.
2.DC 12V/5AH built-in rechargeable
battery
: 60W Max
: 16cm 25W/4
*
x 2pcs
: 35M
: VHF 165-265 MHz
:
*
0.005% quartz oscillating locked
: 550 x 410 x 1150mm
: 20kgs
Specification & Features
We reserve the right to alternate or improve the technology of the
movable Wireless PA Amplifier without any notice in advance.
1. One main movable wireless PA Amplifier
2. Four flexible MICS (lamps as option)
3. One handheld wireless MIC
4. One power cable
5. One MP3 remote controler
Standard match accessories
The switch of the Movable Wireless PA Amplifier must be in "OFF"
position after use, otherwise, the internal built-in rechargeable battery
would continue its power release and result in damage of it.
Caution
Note: AC power plug must be pulled off after charge or if you're
not going to use it for a period of time.
Switch power to "ON", the light of power LED indicates the normal
function of DC built-in rechargeable battery and the amplifier is on
operation. Turn off the power after operation so as not to shorten the
use span of it.
System works on DC power
1.Using AC power, plug the amplifier to the AC power outlet, make
sure you're using correct power voltage.
2.Switch ON the amplifier, power LED lights, indicates normal functioning.
If the power LED light is not indicated,check the AC/DC fuse or
connecting cable. Power switch must be turn OFF after using.
3.Power is supplied by the built-in rechargeable battery when the
AC power is cut down.
4.To charge the built-in rechargeable battery, plug in to AC power
source and switch it to "CHARGE", Green LED lights, means normal
charge function. The LED will be dim when it is full charged.
5.Using DC power, the built-in rechargeable battery will serve as
your power source when you are going to use the amplifier in area
where no AC power source is available commonly applicable for
outdoor use.
6.AC power plug must be pulled off after finish charging or if you're
not going to use it for a while.
System operation on AC power
10
