H-6800 Conference set User manual
10
d)
Code Setting
Main unit diplay
Mic display
e)
High-frequency Compensation
Each mic has a number ID which is affected (very important to setup the auto-
track function (this function will be explained later).
Main unit:
- The main unit starts the setup of the mic code by selecting the number. For
that, use the b and - touch screen.
- Once the selected number, press on button OK, usually system setup the
code from 1
- In general, you assign number 1 to the chairman mic.
- The following codes are transmitted to all the delegate mic.
- When all the mic ID are affected, press on the button Back for exit of the menu
.
Microphone:
- This message is displayed on all the microphone touch screen. Press the
on/off button of the corresponding mic to the affected the number.
- The other mic are always this message posted but with an incremented
number of a unit. Press then on button on/off of the mic concerned and so on
until all the mic are assigned to a number.
- All mic LED will start flash during setup code, the LCD will off after setup code.
- Please restart the system to save the system code setup of mic
You can adjust the treble of the system audio output.
Push + and – buttons to adjust then push Back button if you want to leave menu
without save the setup
