Output Connectors
37. BALANCE OUTPUT (MAIN L/R)
These sockets send line level signals from the mixer to external devices (for example
：
EQ or power amplifier)
．
L/R IACK UNBALANCE OUTPUT
These are jacks to send the finally mixed outputs to the other appliance (amplifier or
EQ)
．
38. SUB1 SUB2 OUT
The terminal to be output with the volume control against inputting signal into SUB l-2
board
．
39. AUX1 AUX2 OUT
This socket sends out the signals from aux bus
．
40. CTRLRM L/R
This jack is to be connected with the input jack of monitor amplifier when using
separate monitor amplifier
．
41. AUX IN
This jack is to be connected with various external auxiliary signal
．
42. PHONES JACK
This is used for monitoring the master signal and individually monitoring each channel
with PEL/AFL switch
．
43. EFFECT SENG
This is used for adjusting volume of echo sound when sending echo sound to send jack
44. RETURN
This is used for adjusting frequency of echo repeat
．
Since too much echo repeat may
caused a howl
．
Please adjust frequency properly
．
45. RECORD PIN JACK
This jack is to be connected with cassette deck when recording the mixed output
．
46. PLAY PIN JACK
This jack is to be connected with cassette deck when playing back
．
Power
