background image

 

 

9

Chapter 2 Conference Main Unit 

 

2.1 Conference Main Units 
 

The  Conference  Main  Unit  forms  the  core  of  the  entire  conference  system.  It  provides  power  supply  to  all 
contribution unit and serves as key component to link system hardware to software control. The CMU adopt 
DSP techniques such as feedback suppression, noise cancellation, automatic gain, and digital equalization. 
It’s flexible and reliable for any conference of mini/medium/large meeting.  

 
Product Include:

 

 

H-9500M 
 

Fully  Digital  Conference  System  Main  Unit  (Discuss,  recording, video  tracking, voting, monitoring,  4.3  inch 
TFT touch display, Ethernet interface) 
 

H-9500E 
 

Fully Digital Conference System Extension Unit 
 

2.1.1 Main Features and Specifications of CMU 
 

a) FTP  Cat6  cables  are  introduced  for  data  transmission  and  power  supply,  supporting  message 
transmission  with  a  fast  internet  service  100M.  Thus,  audio  signals  could  be  delivered  perfectly  in  a  long 
distance. 
b) A sampling frequency of 48kHZ is supported by the system. 
c) In order to ensure a clear, highly sensitive, and perfect sound quality, CMU built-in high-performance dual-
core  CPU,  32  bit  high-speed  DSP  technologies,  feedback  suppression,  noise  cancellation,  automatic  gain, 
and digital equalization are all available. 
d) TCP (transmission control protocol) and IP (internet protocol) are all available, enabling a reliable and safe 
management. 
e) Built-in video  tracking  control  and  ballot  processor,  high  definition  switching matrix  are  available for  auto 
video tracking with HD video matrix. 
f) The CMU owns a built-in USB, allowing the realizing of recording and monitoring. 
g) Audio could be outputted in balanced or unbalanced way. 
h) Different kinds of interfaces, like, Ethernet, RS422 and RS232, could meet requirements towards different 
devices. 
i) Three modes are available, including REQUEST(1-4),LIMIT (1-4), and FIFO (1-4). They all support speech 
timing function. 
j) Multiple conference functions could be realized when CMU is connected to computer. 
k) Power Input: 230VAC 50/60Hz 
l) Static Power: 12W 
m) Maximum Output Power: 300W 
n) Frequency Response: 20Hz-20KHz 
o) S/N: > 80dB 
p) T.H.D: <0.05% 
q) Dimensions: 484x 88 x 360 mm, 2 U rack 19” 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for H-9200 Series












































Reviews: