LY International Electronics H-8000, Instruction Manual

Page: 2 / 6

Video Camera Auto-Track Conference System
In modern society, the request of conference is not just limited on the simple sound, but
also requests the music, video backup records or remote transmission, this system is designed
for meeting this kind of requests. This system can implements connection between the
speaking and photography to implement the automatic tracking location photography function.
This system easy to operate, setting the photography spot through using the software, and it
can also setting the spot without the computer, so that to enhance the flexibility for using and
save the cost.
Function of Video Processor (H-8008)
1. Build-in video switching matrixes (8 input, 2 output).
2. 256 video camera auto-track control points. Multi-machine cascade
3. Support Pelco-D and VISCA protocol. (Pelco-D, Baud Rate: 9600, VISCA , Baud Rate:9600)
4. The processor can communicate with the equipments by RS232 interface, such computer or
video switching matrixes.
5. High speed dome follows the location for last opening of all speaking representative , when
the microphone which opened last was closed, the dome will follows back the last following
camera spot, and when all the speaking representative microphone were closed, the dome
will automatically moves back to the standby position.
6. When without the computer, set the camera spot advanced through pressing the button in
main unit board, and also set by the IR remote controller.
H-8008 Schematic diagram:
1. Power switch
2. IR Lens
3. Camera number selecting button (VIDICON 1-8), send the photography to the related
display screen through pressing this button
4. Power indicative lamp
5. Busy indicative lamp
6. Power indicator of each camera
7. Zoom setting
8. Camera direction set button (up, down, left, right)
9. Reset button (delete all the pre-setting spot)