background image

 

 

Grounding or Polarization: 

 

All precautions must be observed in order to avoid defeating grounding or polarization. 

 

Unit metal parts are grounded through the AC power cord.  

 

If the AC power outlet doesn

’t have grounding, consult an electrician for outlet grounding. 

 

Power cable protection: 

The power cable should be routed in such a way that it will not be walked on or pinched by items placed 
upon or against it, paying particular attention to cables at their connections, receptacles and wall outlet. 

 

Cleaning: 

 

You can clean the exterior of the unit with compressed air or a damp cloth.  

 

Don’t  clean  the  unit  using  solvents  like  trichloroethylene,  thinners,  alcohol,  or  other  volatile  or 
flammable fluids. 

 

Non use periods: 

The unit AC power cable should be unplugged from the outlet if it’s unused for long periods. 

 

Objects or liquid entry into the unit: 

Be careful that no  objects fall into the unit or that  no  liquid  is spilled inside the unit  through ventilation 
openings.  

 

Safe power line use: 

 

Hold the plug and the wall outlet firmly while disconnecting the unit from AC power. 

 

When  the  unit  will  not  be  used  for  a  long  period  of  time,  please  unplug  the  power  cord  from  AC 
power outlet.  

 

To avoid power cable damag

e, don’t strain the AC power cable and don’t bundle it.  

 

In order to avoid damage to the unit's power cable, be sure that the power cable is not walked on or 
pinched by heavy objects.  

 

Unit relocation:  

Before relocating the unit, please control the unit is turned off. The power cord must be unplugged from 
the wall outlet, and all the connecting cables should be disconnected as well. 

 

Do not open this unit:  

Do not attempt to open or repair this unit yourself

. For any problem not described in this owner’s manual, 

please refer to qualified personnel only or consult us or your National Distributor. Any improper operation 
could result in fire or electric shock. 

 

Damages requiring services: 

 

Do not attempt to pe

rform operations not described in this user’s manual.  

 

In the following cases please refer to an authorized service center or skilled personnel:  

- When the unit works improperly, 

or it doesn’t work at all.  

- If power cord or plug is damaged.  
- If liquid has spilled, or objects have fallen into the unit.  
- The unit has been exposed to rain.  

The unit doesn’t operate normally or exhibits a marked change in performance.  

- If the product has been dropped or has been damaged in any way.  

 
 Maintenance:  

The 

user shouldn’t attempt maintenance not described in this user’s manual.  All maintenance should be 

performed by qualified personnel only. 
 

 
 IMPORTANT SAFETY INSTRUCTIONS:  
 

 

Install this unit following owner’s manual instructions.  

 

Do  not  install,  connect  or  disconnect  power  supply  when  the  unit  is  powered,  otherwise  there  is  a 
high risk of electric shock.  

 

Do not open the unit, there are no user serviceable parts inside.  

 

If  you  detect  a  particular  smell  from  the  unit,  please  immediately  turn  it  off  and  disconnect  the  AC 
power cord.  

 

Don’t block the unit's ventilation openings.  

 

Avoid using this unit in overload for a long period.  

Summary of Contents for H-2400M

















Reviews: