background image

 

IMPORTANT SAFETY INSTRUCTIONS 

 

                                     

                       

 

 

CAUTION:   

To  reduce  the  risk  of  electric  shock  do  not  remove  cover  (or  back  panel).  No  user 
serviceable parts inside. Refer servicing to qualified personnel only. 

 

WARNING:

  To  reduce  the  risk  of  fire  or  electric  shock,  do  not  expose  this  apparatus  to  rain  or 

moisture. 

 
                           This symbol is  intended to  alert the  user of the  presence of uninsulated dangerous voltage 

within  the  product  enclosure  that  may  be  of  sufficient  magnitude  to  constitute  a  risk  of 

electric shock to persons. 

 
 
          

This  symbol  is  intended  to  alert  the  user  of  the  presence  of  important  operating  and 
maintenance  (servicing)  instruction  in  the  literature  accompanying  the  appliance.  Please 

carefully read the owner’s manual. 

 

 
INSTRUCTIONS: 
 

All safety and operating instructions should be read before the product is operated. 
 

Retain these instructions: 

All safety and operating instructions should be retained for future reference.  
This owner’s manual should be considered as a part of the product, it must accompany it at all times, and it 
needs to be delivered to the new user when this product is sold. In this way the new owner will be aware of 
all the installation, operating and safety instructions.  

 
Heed all warnings: 

All warnings on the product and in owner

’s manual should be adhered to

.  

Heed all warnings. 

 
Follow all instructions: 

All opera

ting and user’s instructions must be followed. 

 

  Sentences preceded by 

 symbol contain important safety instruction. Please read it carefully. 

 
 

DETAILED SAFETY INSTRUCTIONS. 

 
Water and moisture: 

This apparatus should not be used near water (i.e. bathtub, kitchen sink, swimming pools, etc.) 

 

Ventilation

This apparatus should be placed in a position that doesn’t interfere with its correct ventilation. This unit, 
for example, should not be placed on a bed, sofa cover or similar surfaces that could cover ventilation 
openings,  or  placed  in  a  built-in  installation,  such  a  bookcase  or  a  cabinet  that  could  block  air  flow 
through ventilation openings. 

 

Heat:  

This  apparatus  should  be  placed  away  from  sources  of  heat,  like  radiators,  heat  registers,  stoves  or 
other products (including amplifiers) that produce heat. 

 

Power sources: 

 

This apparatus should only be connected to a power source of type specified in this owner’s manual 
or on the unit. 

 

If  the  supplied  AC  power  cable  plug  is  different  from  wall  socket,  please  contact  an  electrician  to 
change the AC power plug. 

Summary of Contents for H-2400M

















Reviews: