background image

*LY*

   

                     

                                                                                     

                                            Paging Microphone 

 

Precautions for safety in use 

1.    Precautions for safety in use 

 

Before connecting the system line properly, do not insert the power plug of this equipment into the grid.   

 

Ensure  the  voltage  input  to  the  equipment  shall  be  fully  consistent  with  the  voltage  of  this  equipment  to 

prevent the risk in the burning of the equipment.     

 

There is the hazardous voltage in the  machine,  which is sufficient to  cause the electric shock to the  person. 

Please do not open the machine housing without authorization to prevent the hazard of electric shock. 

 

In the event that the power supply to this equipment is turned off, the machine is not fully disconnected with 

the power supply of the grid. For the purpose of safety, please pull the power plug out of the socket when the 

equipment is not in service.   

 

Please do not put the equipment in the extremely cold or hot place. 

 

Ensure  the  good  ventilation  in  the  working  environment  of  the  equipment,  to  prevent  the  damage  to  the 

equipment due to the heating in working and excessively high temperature. 

 

In the rainy and humid days or if the machine is not in service for a long term, please pull out the power plug. 

 

Before  removing  or  reassembling  any  part  of  the  equipment,  disconnecting  or  reconnecting  any  electrical 

plug  or  other  connections  of  the  equipment,  be  sure  to  pull  out  the  power  plug  to  ensure  the  full 

disconnection of the equipment with the grid. 

 

In case of any fault in the equipment, the non-professional person shall not disassemble the housing for repair 

without the approval, in order to prevent accident or aggravate the damage to the equipment. 

 

Do not put any corrosive chemicals nearby or on the equipment. 

2.    Precautions for after-sales service 

 

In  case  of  the  installation  and  operation  according  to  this  instruction,  the  company  will  provide  the  free 

warranty service (Including replacement of parts free of charge) for any problem in the normal operation for 

three years since the date of purchase.     

 

In  case  of  the  warranty,  the  user  shall  show  the  user’s  voucher  of  warranty  card  and  the  invoice  as  the 

certificate. 

 

In any of the following cases, the free warranty shall not be applicable: 

1. The damage to the product due to the incorrect installation, use or handling;     

2. The damage to the product due to the abnormal conditions (e.g. excessively high power voltage or ambient 

humidity);   

3. The damage to the product due to natural and man-made disaster and other accidents; 

4. The number on the product body is changed, altered or removed;     

5. The product has been repaired or refitted by the person other than those authorized by the company;     

 

Please keep the operation instruction and warranty card properly. 

 

For the issue or matter not covered herein, please contact the distributor or visit 

http://www.lyintlcorp.com

.   

 

In case of any fault occurred during the period of warranty, please contact the service personnel of our 

company (or distributor); our company will not take responsibility for the damage due to the unauthorized 

disassembly or the repair by the person other than the technicians of our company. 

 

 

Summary of Contents for CM12












Reviews: