*LY*
Paging Microphone
2
II. Description of Appearance
2.1 Description of Front Panel
-5
O UTPUT LE VEL(dBV)
-10
0
3
5
MIC
A LL ON
AL L OF F
CHIME-1
CHIME -2
1
2
3
4
5
6
7
8
9
10
PO WER
Remote Paging CM12
1
2 3 4 5 6 7 8
9 10 1112 13
14 15
1 Output level indicator lamp
The higher the output level is, the more indicator
lamps are alight.
2 MIC switching key
Press this key to switch on the microphone and then
input the voice. The corresponding indicator lamp 3
will be alight.
3 MIC working indicator lamp
Press MIC key 2; when MIC is operating normally,
this indicator lamp will be alight.
4 CHIME-1 switching key
Press this key to switch on bell 1, and the
corresponding indicator lamp 5 will be alight.
5 CHIME-1 indicator lamp
Press the CHIME-1 key 4 to select the bell 1, and this
indicator lamp will be alight.
6 Microphone interface
Connect
the
gooseneck
microphone
in
the
specification of CM10.
7 CHIME-2 indicator lamp
Press CHIME-2 key 6 to switch on the bell 2, and the
corresponding indicator lamp 7 will be alight.
8 CHIME-2 switching key
When pressing CHIME-2 key 6 to select the bell 2,
this lamp will be alight.
9 Key ALL ON for one-key switching-on of
partitions
Press this key to switch on all the partitions, and the
corresponding indicator lamp 10 will be alight.
10 Indicator lamp for one-key switching-on
partitions
Press ALL ON key 9 to switch on all the partitions;
when the indicator lamps indicating the normal
operation of the partitions are alight, this lamp will be
alight.
11 Key ALL OFF for one-key switching-off of
partitions
Press this key to switch off all the partitions, and the
corresponding indicator lamp 12 will be alight.
12 Indicator lamp for one-key switching-off
partitions
Press ALL OFF key 11 to switch off all the partitions;
when the indicator lamps indicating the normal
operation of the partitions are off, this lamp will be
alight.
13 Power indicator lamp
14 Partition 1 switching key
Press this key to switch on partition 1, and the
corresponding indicator lamp 15 will be alight, and so
forth for the partition 2 through partition 10, any of
which is controllable separately.
15 Partition 1 working indicator lamp
When pressing key 14 to operate partition 1, this lamp
will be alight.
