LX Zeus
February 5, 2013
- 32 -
3 Navigation modes
LX Zeus offers three modes for navigation. The modes are:
•
APT
: navigation to Airports which are stored in APT memory
•
TP
: navigation to turn points (TP)
•
TSK
: task navigation after a task has been entered
Any of three modes is selectable after sequenced pressing on
A-P-T
push button.
3.1 APT mode (navigation to airports)
LX Zeus is capable to store more airport data files
in
.af
format (LX Navigation airport format).
At the same time only one file can be active.
Selection of the file of interest should be carried out in
Setup/Transfer section Airfields.
APT mode consists from three navigation pages.
See also 2.2.
Any of them is directly selectable by
SUBP
button.
Note:
the third sub page (3D terrain) can be disabled
(see Setup User interface).
Airports are designated with a symbol:
The RWY orientation match real situation.
Extended Airport data are available in
the lover section of second navigation page.
After using of
1-4
button the supplemental
information page in form of a vertical profile will open.
The upper part of the display is custom designed,
the procedure is the same as for the Bottom Row.
3.2 How to select an airport?
Airport selection is active from any mode of operation
and also from any sub page. Use press on
Select
button (short press) and select menu will open.
Use APT option and selection dialogue will start.
Note!
The profile respects airspace structure and
also MC setting. By MC setting 0, the cone
will be reduced to a line.
