background image

F display Version 1.21 

 

December 2018 

 

 

Page 4 of 26 

1.1.1

 

Disposal of Old Electrical & Electronic Equipment  

(Applicable  in  the  European  Union  and  other  European  countries  with  separate 
collection systems) 

This  symbol  on  the  product  or  on  its  packaging  indicates  that  this  product  shall  not  be 
treated as household waste. Instead it shall be handed over to the applicable collection point 
for the recycling of electrical and electronic equipment. By ensuring this product is disposed 
of correctly, you will help prevent potential negative consequences for the environment and 
human  health,  which  could  otherwise  be  caused  by  inappropriate  waste  handling  of  this 
product.  The  recycling  of  materials  will  be  a  help  to  conserve  natural  resources.  For  more 
detailed  information  about  recycling  of  this  product,  please  contact  your  local  Civic  Office, 
your household waste disposal service, or the shop where you purchased the product. 
 

 

 
 

1.2

 

Flarm end user license agreement 

This  section  contains  the  End  User  License  Agreement  issued  by  FLARM  Technology  Ltd, 
the licensor of FLARM devices.

 

 

 

END USER LICENSE AGREEMENT 
 

By purchasing or using a FLARM device or by downloading, installing, copying, accessing, or 
using  any  FLARM  Technology  Ltd,  Cham,  Switzerland  (hereafter  "FLARM  Technology") 
software, firmware, license key, or data, you agree to the following terms and conditions. If 
you do not agree with the terms and conditions do not purchase or use the FLARM device 
and  do  not  download,  install,  copy,  access,  or  use  the  software,  firmware,  license  key,  or 
data. If you are accepting these terms and conditions on behalf of another person, company, 
or  other  legal  entity,  you  represent  and  warrant  that  you  have  full  authority  to  bind  that 
person, company, or legal entity to these terms and conditions. 
If  you  are  purchasing  or  using  a  FLARM  device,  the  terms  "firmware",  "license  key",  and 
"data" refer to such items installed or available in the FLARM device at time of purchase or 
use, as applicable. 
 

1. 

License and Limitation of use 

1.1. 

License.

 Subject to the terms and conditions of this Agreement, FLARM Technology 

hereby  grants  to  you  a  non-exclusive,  non-transferable  right  to  download,  install, 
copy,  access,  and  use  the  software,  firmware,  license  key,  or  data  in  binary 
executable  form  solely  for  your  own  personal  or  internal  business  operations.  You 
acknowledge  that  the  software,  firmware,  algorithms,  license  key,  or  data  and  all 
related information are proprietary to FLARM Technology and its suppliers. 

Summary of Contents for FlarmLED+



























Reviews: