background image

F display Version 1.21 

 

December 2018 

 

 

Page 6 of 26 

 

4. 

Manipulation.

 It is forbidden to intentionally feed artificially generated signals to the 

FLARM  device,  its  GPS  antenna  or  the  external/internal  GPS  antenna  connections,  unless 
agreed with FLARM Technology in writing for limited R&D activities. 
 

5. 

FLARM Data and Privacy 

5.1. 

FLARM  devices  receive,  collect,  store,  use,  send,  and  broadcast  data  to  enable  the 
system to work, improve the system, and to enable troubleshooting. This data may 
include,  but  is  not  limited  to,  configuration  items,  aircraft  identification,  own 
positions,  and  such  data  of  other  aircraft.  FLARM  Technology  may  receive,  collect, 
store,  and  use  this  data  for  said  or  other  purposes  including  Search  and  Rescue 
(SAR). 

5.2. 

FLARM  Technology  may  share  data  with  its  partners  for  aforementioned  or  other 
purposes.  FLARM  Technology  may  in  addition  publicly  make  available  data  from  a 
FLARM  device  (Flight  Tracking).  If  a  FLARM  device  has  been  configured  to  limit 
tracking, SAR and other services may not be available. 

5.3. 

Data  sent  or  broadcast by  FLARM  devices  may only  be  used  at  own  risk  and  under 
the same conditions as the FLARM device itself, and is encrypted partially to ensure 
message  integrity,  system  safety  and  provide  protection  for  the  relevant  content 
against  eavesdropping,  namely  by  article  3  of  the  Budapest  Convention  on 
Cybercrime  as  signed  and  ratified  by  most  countries  respectively  its  national 
implementations.  FLARM  Technology  is  not  responsible  for  any  third  party  device, 
software,  or  service  receiving,  collecting,  storing,  using,  sending,  broadcasting,  or 
making publicly available data regardless of whether legally or illegally. 

 

6. 

Warranty, Limitation of Liability, and Indemnification 

6.1. 

Warranty.

 FLARM devices, software, firmware, license keys, and data are provided 

on  an  "as  is"  basis  without  warranty  of  any  kind  —  either  expressed  or  implied  — 
including, without limitation, any implied warranties of merchantability or fitness for a 
particular  purpose.  FLARM  Technology  does  not  warrant  the  performance  of  the 
device,  software,  firmware,  license  key,  or  data  or  that  the  device,  software, 
firmware, license key, or data will meet your requirements or operate error free. 

6.2. 

Limitation of Liability.

 In no event shall FLARM Technology be liable to you or any 

party related to you for any indirect, incidental, consequential, special, exemplary, or 
punitive damages (including, without limitation, damages for loss of business profits, 
business  interruption,  loss  of  business  information,  loss  of  data  or  other  such 
pecuniary  loss),  whether  under  a  theory  of  contract,  warranty,  tort  (including 
negligence),  products  liability,  or  otherwise,  even  if  FLARM  Technology  has  been 
advised of the possibility of such damages. In no event will FLARM Technology’s total 
aggregate  and  cumulative  liability  to  you  for  any  and  all  claims  of  any  kind  arising 
hereunder exceed the amount of fees actually paid by you for the device, license keys 
or  data  giving  rise  to  the  claim  in  the  twelve  months  preceding  the  claim.  The 
foregoing limitations will apply even if the above stated remedy fails of its essential 
purpose. 

6.3. 

Indemnification.

  You  will,  at  your  own  expense,  indemnify  and  hold  FLARM 

Technology,  and  all  officers,  directors,  and  employees  thereof,  harmless  from  and 
against  any  and  all  claims,  actions,  liabilities,  losses,  damages,  judgments,  grants, 
costs,  and  expenses,  including  reasonable  attorneys’  fees  (collectively,  “Claims”), 
arising out of any use of a FLARM device, software, firmware, license key, or data by 
you, any party related to you, or any party acting upon your authorization. 

 

Summary of Contents for FlarmLED+



























Reviews: