manualshive.com logo in svg

LXE MX3Plus, Reference Manual

The LXE MX3Plus Reference Manual is a comprehensive guide that allows users to fully utilize the features of this remarkable product. Available for free download at manualshive.com, this manual provides step-by-step instructions and valuable information to enhance your experience with the LXE MX3Plus. Get the most out of your device with this essential manual.

Share
Download
background image

System Memory

l

One Digitizer Input port (see Touchscreen).

l

Two I/O ports in six configurations (see Endcaps and COM Ports).

System Memory

A CF Card FLASH is used for ROM, Flash for Windows operating system and Flash memory for bundled applications. The
Flash is configured as the primary boot device and contains the Windows operating system image, boot loader, OAL,
applications, utilities and device drivers.
Any flash remaining beyond the Windows operating system image is formatted for use as a persistent memory drive (which
appears in My Computer as the folder labeled System). Any programs or data stored in this folder will not be lost if the memory
backup battery fails.
The computer has one Type II CF+ slot. The computer supports and auto detects up to 256MB of Type I compact flash
memory.

Video Subsystem

The display has a 640 pixel (horizontal) by 240 pixel (vertical) format. Display contrast adjustment is not necessary and the
contrast adjustment key has no effect on the MX3Plus. Backlighting is available and can be adjusted with key sequences. The
turn-off timing is configured through the Control Panel. The display controller supports Windows CE graphics modes.
Touchscreen allows mouse functions (pointing and taping on the display or Signature Capture) using an LXE approved stylus.
There are two types of displays available:

l

The active transmissive color display is optimized for indoor lighting and cannot be viewed without the backlight.

l

The active transflective display is optimized for outdoor viewing.

Power Supply

The MX3Plus uses two batteries for operation.
A 1900 mAh replaceable Lithium-Ion (Li-Ion) battery pack. The battery pack recharges while the computer is in a powered
cradle or when connected to the optional external power sources. The main battery can be removed and inserted in the MX3
Multi-Charger which simultaneously charges up to six battery packs in four hours.
An internal 50 mAh Nickel Cadmium (NiCd) backup battery. The backup battery is recharged directly by the main battery when
it is in the mobile device. Full charging of the backup battery may take several hours. The recharging of the backup battery is
automatically controlled by the operating system. The backup battery must be replaced by qualified service personnel.
Optional AC adapters are available – external AC power supplies (US and International) and a cigarette lighter adapter.

Audio Interface

An interface is available for headset operation. When a headset is plugged into the audio jack on the endcap, the main speaker
is disabled.

E-EQ-MX3PLUSRG-J [ 8  ] MX3Plus Reference Guide

Summary of Contents for MX3Plus

















































































































































































































































































Reviews:

No comments

Related manuals for MX3Plus

Acer n30 Quick Manual preview
n30
Brand: Acer Pages: 20
Datalogic Falcon X3 User Manual preview
Falcon X3
Brand: Datalogic Pages: 111
Dotel DOTH-300S User Manual preview
DOTH-300S
Brand: Dotel Pages: 22
Hoft & Wessel HW 90396 Instruction Manual preview
HW 90396
Brand: Hoft & Wessel Pages: 97
Palm TX Read This First Manual preview
TX
Brand: Palm Pages: 12
HIKVISION DS-1530HMI User Manual preview
DS-1530HMI
Brand: HIKVISION Pages: 11
Casio PV-250X User Manual preview
PV-250X
Brand: Casio Pages: 6
Casio IT-600M30 Hardware Manual preview
IT-600M30
Brand: Casio Pages: 36
Casio IT-G500-15E User Manual preview
IT-G500-15E
Brand: Casio Pages: 60
Casio IT-600 Series User Manual preview
IT-600 Series
Brand: Casio Pages: 58
Casio IT-G500 Series Software Manual preview
IT-G500 Series
Brand: Casio Pages: 234

Brands by name

Popular brands

Load more brands