LXE MX3-CE, Reference Manual, Page: 31 / 166

Getting Started 19
E-EQ-MX3CERG-E MX3-CE Reference Guide
Set The Audio Speaker Volume
Note: An application may override the control of the speaker volume. Turning off sounds saves
power and prolongs battery life.
The audio volume can be adjusted to a comfortable level for the operator. The volume is increased
or decreased one step each time the volume key is pressed. The MX3-CE has an internal speaker
and a jack for an external headset.
Using the Keypad
Note: Volume & Sounds (in Control Panel) must be enabled before the following key sequences
will adjust the volume.
To adjust speaker volume, locate the <F8> key at the top of the keypad. Adjust the
speaker volume by pressing the:
•
2
nd
key
2
, then the <F8> key to enter Volume change mode.
•
Use the Up Arrow and Down Arrow keys to adjust volume until the speaker volume is
satisfactory.
•
Press the Enter key to exit this mode.
Using the Touch Screen
Select Start | Settings | Control Panel | Volume & Sounds | Volume tab . Change the volume
setting and tap OK to save the change.
Enable sounds for:
Events (warnings, beeps and system events)
Applications (program specific and all other sounds)
Notifications (alarms, appointments and reminders)
Volume Sounds
Loud
Soft
Volume & Sounds Properties
Key clicks:
Screen taps:
Enable clicks and taps for:
Loud
Loud
Soft
Soft
Figure 1-18 Adjust Audio Volume
You can also select / deselect sounds for key clicks and screen taps and whether each is loud or
soft.
2
The LED for this key blinks until the special editing mode (set volume or contrast) is complete.