LVI MagniLink Voice 2, User Manual

Page: 27 / 38

MagniLink Voice 2
User Manual 7943064e | MagniLink Voice 2 27
Get information about the unit's serial number
Rotate the function control (E) until the unit says "about" and then press
the control. Rotate the function control again (E) until the unit says "serial
number" and press the control. The unit's serial number will now be read
aloud.
Get information on the version of the software
Rotate the function control (E) until the unit says "about" and then press
the control. Rotate the function control again (E) until the unit says
"version" and press the control. The unit will now read aloud information
about the software version.
Update license
Updating the unit's license requires a USB memory stick with a license file
to be plugged into the unit. Rotate the function control (E) until the unit
says "about" and then press the control. Rotate the function control
again (E) until the unit says "update license" and press the control. The
unit will then notify you if the licence update was successful.
Update software
Updating the unit's software requires a USB memory stick with new
software to be plugged into the unit. Rotate the function control (E) until
the unit says "about" and then press the control. Rotate the function
control again (E) until the unit says "update software" and press the
control. When the update is complete, the unit will notify you of this.
Save profile
Make sure that a USB memory stick is plugged into the unit. Rotate the
function control (E) until the unit says "save profile" and then press the
control.
Load profile
Make sure that a USB memory stick is plugged into the unit. Rotate the
function control (E) until the unit says "load profile" and then press the
control. Rotate the function control again (E) until the desired profile is
read aloud and then press the control to load it. The profiles must be in
the root directory of the USB memory stick in order for the unit to find
them.
Factory profile
Rotate the function control (E) until the unit says "factory profile" and
then press the control.