LVI MagniLink Voice 2, User Manual

Page: 26 / 38

MagniLink Voice 2
26 User Manual 7943064e | MagniLink Voice 2
Change font (only available if a monitor is connected)
Rotate the function control (E) until the unit says “graphics” and press the
control. Rotate the function control (E) again until the unit says “font”
and press the control. Rotate the control until the desired font is read
aloud and press the control to select this.
Change font size (only available if a monitor is connected)
Rotate the function control (E) until the unit says “graphics” and press the
control. Rotate the function control (E) again until the unit says “font
size”. It is now possible to change the font size by rotating the level
control (F).
Change artificial colours (only available if a monitor is connected)
Rotate the function control (E) again until the unit says “graphics” and
press the control. Rotate the function control (E) again until the unit says
“artificial colours” and press the control. Rotate the control until the
desired colours are read aloud and press the control to select these.
Change contrast level (only available if a monitor is connected)
Then rotate the function control (E) until the unit says “graphics” and
press the control. Rotate the function control (E) again until the unit says
“contrast level”. It is now possible to change the contrast level by
rotating the level control (F). This setting only has an effect if any artificial
colours are selected.
Change display mode (only available if a monitor is connected)
To change display mode, rotate the function control (E) until the unit says
“display mode” and then press the control. Then select display mode by
rotating the function control (E). When you are satisfied with your
selection, press the control (E) again. There are six display modes with
speech: “word”, “line”, “page”, “picture”, “picture and word” and
“picture and line”. There are also two silent modes. One where the text is
moved horizontally on one line and one where the text is moved vertically
in a column.
Check battery status (only unit with battery)
Then rotate the function control (E) until the unit says "battery status"
and press the control. The battery status will now be read aloud.
Change lighting
Then rotate the function control (E) until the unit says "lighting". It is now
possible to turn the lighting on and off by pressing the function control
(E) and adjust the lighting by rotating the level control (F).