29
WEEKLY MAINTENANCE
ADJUSTMENT; SIDE BARS
MAGNA 85/S 100/S
Figure 58
Periodically proceed with the height adjustment of the side-bars. This operation has to
be carried out with the base lowered.
1.
Loose the knob (1)
2.
Tighten the adjuster (2) to lift the side bar or unscrew the adjuster (2) to lower the
side bar
3.
When the adjustment has been completed, fix the knob (1)
Figure 59
4. Take off the retaining clip
5. Take off the side bar
6. Adjust the height of the support nut
7. Put the side bar and the retaining clip back into their position
Keep in mind that the side bars must be parallel to the floor
These adjustments have to be carried out on both side bars
CLEANING OF THE SUCTION HOSE
Figure 60
Whenever suction seems to be unsatisfactory, check that the suction hose is not
obstructed. Eventually, clean it with a water jet introduced from the side where it is
connected to the tank. Proceed as follows:
1.
Unscrew the four screws and take off the suction motor cover
2.
Loosen the clamp which tightens the hose
3.
Clean with a water jet introduced from the side where it is connected to the tank
4.
Reassemble everything in reverse order to the above mentioned operations
CLEANING SUCTION MOTOR FILTER
Figure 61
Unscrew the four screws and take off the suction motor cover
2. Unscrew the three knobs which fix the suction motor to the support
3. Take off the suction motor
4. Extract the filter and clean it thoroughly
Reassemble everything in reverse order to the above operations.
