93
You can also set the way the phone receives RTP streams through the Web, which
can be divided into paging intervention, DND penetration, and paging priority.
Configure the path: Directory →multicast address.
6.3.3 Receive multicast RTP stream
You can set the phone to receive the multicast RTP stream sent from the pre-
configured multicast address. The multicast process does not involve SIP signaling.
Up to 31 different multicast addresses can be configured to monitor on the phone.
1.
Paging intervention:
If there is multicast during the call, if the current
multicast priority is lower than the call priority, the phone will automatically ignore
the multicast; disable it to ignore all multicasts, the range is 1-31. For example, if
the priority is set to 1, the multicast with priority 2-31 is ignored.
2.
Penetrate DND:
If the phone is enabled to penetrate DND, priority is 3; when
the phone is enabled in the DND mode, multicasts with a priority greater than or
equal to three can be answered normally;
3.
Paging priority
: If you enable paging priority, when the phone is listening to
the multicast RTP stream with priority 5, at this time the multicast RTP
stream with priority 3 is sent, and the phone will automatically receive priority
3 Multicast RTP stream.
- set the listening multicast address via the web interface
1. Click
Directory-- Multicast address
2. Select the appropriate value in the drop-down box of Paging Intervention.
3. Select Enable in the drop-down list of Paging Priority.
4. Enter the monitored multicast address in the monitoring address field: IP
address and port number (for example: 224.5.6.20:10008)
