IAD SERIES USERS MANUAL
47
Figure 5-2 SIP user set
This product provides 8 FXS ports, 8 analog phones can be hung under the maximum support, 8 users can be
added, the page has been configured with the internal number of 8 users. The user here is SIP user, go to analog
channel.
Item
Description
Line ID
The analog channel for user,the system has default
value.
Internal number
The user's internal number, the system has a default
value, can not be modified
SIP user number
The SIP user number assigned to the user, and the SIP
user number is used to dial each other between the IAD
analog user and the external user.
Auth User name
Fill in the SIP registration server to identify the user
name. After registration, the IP address of the user can
be located.
Auth Password
Fill in the password of the registered authenticated user.
The default value is “Aa111111”
Status
Select "enable" to enable the line; Select disable to
disable the line.
Register
Click < register > to register with the SIP registration
server.To set up the SIP server please see <Voicework>
<SIP server set>
Linestatus
When the line is Disabled, display "Disabled"; When
the line is enabled, "UP" will be displayed after
successful registration; Registered failure show
"Unregistering".
Generally speaking, there are two forms of docking with operators. One is direct docking, that is, no need Account
number and password, only need to know the other party's IP address and port, directly invited the called number
to the service operator; One is to register with the service server first and then send the invitation. In this way,
authentication is enabled and the account and password are verified.