16
• Turn on the main power switch, and the pilot lamp (9) will be lighted. Open
the slit width control knob (12) to examine the illumination.
• Press the brightness control switch (7) respectively at two positions and
the brightness should be changed according.
• Check the fixation target device to confirm it is lighting.
• Check it all the movable parts such as aperture and slit height control knob
(15), filter selection lever (16), and magnification changer lever (13) etc. could
be operated freely.
• After examining, turn off the main power ad cover the instrument with the
dust cover (N).
3. Operation
3.1 Diopter compensation and pupil distance adjustment.
1.
Use of the focusing text rod (M) The rod is supplied as one of standard
accesories for confirming the microscopes is adjusted correctly.
Insert it into the main shaft hole with the flat surface.
Focusing test rod
Shaft holder
Important Matters
After adjusting, remember to take out the rod and insert the protection cap.
